Plastic cable ties and PG cable glands buyer tips? Our ATEX accessories meet the requirements of the European Directive 94/9/EC as required. Here, too, you can choose from a wide range of lock nuts, extensions and reductions as well as seals. In addition, we offer adapter elements and special clamping brackets for our ATEX Ex d/e cable glands to achieve an additional external strain relief.
Ratings and standards: Because cable glands are designed with safety in mind, they come with a rating system to ensure you know what you’re getting. The Ingress Protection Marking (IP) rates the glands depending on their design and efficiency throughout different tasks. These rating often go up to IP68 and IP69K. Any cable glands you buy today will also be covered by the new European standard for Cable Glands, EN50262. It’s important to check that any devices placed in explosive atmospheres comply with national or international codes of practice.
Pg thread form of a German conduit pipe thread (DIN 40430) Unit: mm The screw thread referred to as a Pg 13.5 is a German DIN standard 40430 conduit pipe thread type. The thread angle is an 80 ° included angle and is similar to the JIS standard JIS C 8305 for thin steel conduit threads. Common applications for cable glands include aerospace, cleanroom, fire protection, industrial, marine, panel or enclosure, power or utility, railway, and telecommunications. Railway glands : Designed for use on trains and associated installations. See extra info at PG Threaded Cable Gland.
The CMP E1FX/M cable gland is suitable for use with all forms of equipment protection permitted in Zone 1 provided always that the prevailing code of practice, installation and maintenance is observed ie. IEC60079-14. Locate the cable gland Armour Cone ensuring the correct side of the cone is outermost – grooved for braid/tape armour and stepped for SWA cables. Pass the cable through the cable gland until the wire armour is engaged with the cone. Spread the wire armour evenly around the cone.
Gable Gland Sizing: Cable gland size tables are provided below for general guidance, however reference should be made to the relevant British Standard or gland supplier. Metric Thread Example: If your instrument, or cable enclosure has a metric thread then using the chart below you can see that if you have a cable with 4 cores, with a nominal area of 4mm2 then an M20 cable-gland should be used.
CableGlandsOnline.com is a leading manufacturer of cable glands located in Mongkok, Kowloon, Hong Kong. Because of our good production management and large volume we are able to sell you the best cable glands at competitive prices. CableGlandsOnline.com is your cable glands online warehouse, just a click away. Source: https://cableglandsonline.com/.