Custom alloy wheels supplier with jjjwheel.com? JWHEEL alloy wheel manufacturers adopt the industry’s advanced casting, spinning, machining, painting and inspection equipment, and at the same time, it is equipped with fully automated robot operation platform and testing equipment to fully meet the product requirements of major high-end customers. The company also sets up a professional team for new product development, design, mold manufacturing, trial production, testing and inspection to provide customers with technical development and support services. Discover more info at alloy wheel manufacturers.
One is size: don’t blindly increase the hub. Some people increase the wheel hub to improve the performance of the car. Under the condition that the outer diameter of the tire remains unchanged, the large wheel hub is bound to match the wide and flat tire. The lateral swing of the car is small, and the stability is improved. pass by. However, the flatter the tire, the thinner the thickness, the worse the shock absorption performance, and the greater the sacrifice in terms of comfort. In addition, the tires are easily damaged if there are some roadblocks such as stones. Therefore, the cost of blindly increasing the hub cannot be ignored. Generally speaking, it is most appropriate to increase one or two sizes according to the size of the original wheel hub.
Pure electric vehicles are driven by electric motors. Unlike fuel vehicles, the engine combustion is not only loud, but also vibrates greatly. When pure electric vehicles are driving, there is no obvious shaking, and the front of the car does not need an air intake grille. Very quiet in the car. Of course, to drive a pure electric car, you need to master the switch. Many people are prone to motion sickness. Many people are used to driving a fuel car. When you start off with a kick of the switch, the power comes fast, the linearity is very strong, the speed is fast, and the back feeling is full. When braking, the switch is closed, and the power recovery function is added, and the power is lost instantly, and the head-up and nodding movements are more obvious.
Low-pressure casting: It is more advanced compared to gravity casting. Although it is also formed by pouring high-temperature liquid metal into the mold and cooling it, the metal molecular density will be higher with the help of constant pressure and the wheel will have higher strength after forming because of the use of low-pressure nitrogen propulsion to accelerate the filling of the mold. The whole process is mechanized, so the level of craftsmanship is stable. This process is usually used for most of the original matching wheels for vehicles today.Jiangjin Wheel is a professional aluminum alloy wheels suppliers,specialized in low pressure casting wheels.
Gravity casting wheels:This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles. Read extra information at https://www.jjjwheel.com/.