Top four sided planer woodworking machines supplier: After 20 years development, V-HOLD has constructed strong hardware facilities and humanized management system by bringing in tens of brand-new large automotive precision CNC machine center from developed countries such as Japan, German, along with over 67,000m2 large modern workshop with complete facilities and production lines, V-HOLD has realized its high efficient production. Besides that, the cooperation with world famous management consulting firm and introduction of modern business administration system such as ERP, 6S have laid solid foundation to the development of V-HOLD. Thanks for the trust and support of our customer. V-HOLD will consistently stick to the belief that: Profession and concentration accomplish excellent brand ! Find additional information on woodworking machinery.
Cross cut saws are perfect when you need to cut across the grain. There are two choices, a blade above the table coming across the wood, or a blade underneath that comes up through the table. The cross saw with the blade underneath the table keeps the blade at a greater distance from the user so is considered safer. It can also be automated with an automatic feed system which allows you to safely cut multiple pieces in one go, which can be more efficient. Jigsaws are best for cutting tight curves, angles and intricate shapes. Blades for jigsaws are short and straight. They’re clamped at the top and bottom and cut in a reciprocating up and down motion.
Up-acting machines can limit staged bending because of the possibility of ram tilt, staged bending may not be a viable option on an up-acting machine. Because staged bending utilises multiple stations on one machine, if any of the stations on an up-acting machine are too far from the centre, ram tilt may result. Hydraulic presses come in many different forms and are used in many different industries. The basic structure to all presses is a heavy-duty main frame with hydraulic cylinders. The number of cylinders are dependent on the pressure requirement. They are operated by a hydraulic power pack. The presses can be manufactured with heated or cold platens and can have conveyors fitted to make the presses automated.
The next woodworking machines is wood planer which is designed for planing large and heavy stock at a comparatively faster rate. The boards to be planed are fed by means of feed rolls along a table against a revolving cutter head. The cutter head is mounted on an overhead shaft which is adjustable for regulating the depth of cut . The table of the planer is much wider and longer than that of a jointer for accommodating large and heavy stock.
The most common application involves gluing a coating (veneer, laminate, composite, PVC etc) onto a substratum (MDF, hardboard, plywood, hollow panels, blockwood etc). The basic configuration of the pressing line is comprised of a feed belt, an automatic press and a discharge deck. This configuration can be completed with numerous options, such as glue spreaders, polishers, automatic feeders, disk, roller or belt conveyors, automatic assembling stations, panel turners and stackers. Lines with various degrees of automation can be supplied right up to fully automatic lines that do not require direct intervention by the operator.
The woodworking lathe is one of the most important machines used in a carpentry shop. This is employed primarily for turning jobs in making cylindrical parts. However, by suitably manipulating the tools, tapers, radii, and other irregular shapes can also be easily turned. It resembles the engine lathe most frequently used in the machine shop, and consists of a cast iron bed, a head stock, tail stock, tool rest, live and dead centers, and a speed control device (Fig. 10.54). The drive, in modern lathes, is individual motor driven ; and a cone pully on the head stock spindle is connected by a belt to a cone pully on the motor shaft.
The wood is fixed between the headstock and tailstock of the lathe. The headstock houses the motor that spins the work-piece. The tailstock is adjustable, moving along the length of the bed to fit work-pieces of various lengths. Once the work-piece is locked in place, the tool rest is set into position. The spinning work-piece is then shaped using a chisel or gouge held fast to the tool rest. Face-plate turning, in with the work-piece is fastened with screws to the face plate of the drive spindle, allows the woodworker to produce bowls and other hollow goods. Find more information on https://www.v-holdmachinery.com/.